AAP Elite S series Dokumentacja Pobierz pdf (Strona 63)

Page 63

COMMAND CONTROL OPTIONS

COMMAND CONTROL OPTIONSCOMMAND CONTROL OPTIONS

COMMAND CONTROL OPTIONS

A very useful feature available from the panel is the DTMF remote Command Control. For this function to work you

must have the optional Voice Board fitted to the panel. When the Voice Board is fitted the panel can provide remote

control of arming & disarming plus turn selected outputs on or off with speech prompts using a standard touch tone

telephone. The owner can check or change the Arm/Disarm status of each of the areas, operate each of the eight

outputs or turn on the optional Microphone.

REMOTE COMMAND CONTROL CODES

Before remote Command Control features can be used the 4 digit DTMF control codes must be programmed. The

DTMF codes can be 1-4 digits in length. There is a code for each area, another to control all of the 8 outputs and one

more to turn on or off the Microphone input.

The addresses for the DTMF Command Control codes are;

P881E XXXX 4 Digit Code for Area "A" Command Control - This is the code used to Arm or Disarm Area "A"

via the telephone.

P882E XXXX 4 Digit Code for Area "B" Command Control - This is the code used to Arm or Disarm Area "B"

via the telephone.

P883E XXXX 4 Digit Code for Area "C" Command Control - This is the code used to Arm or Disarm Area "C"

via the telephone.

P884E XXXX 4 Digit Code for Area "D" Command Control - This is the code used to Arm or Disarm Area "D"

via the telephone.

P885E XXXX 4 Digit Code for Output Command Control - This is the code used to access the Output

Command menu. A number from 1-8 is entered after this code to select the output you wish to

control (for this feature to work, option 5 at addresses P681E to P688E must be turned on).

P886E XXXX 4 Digit Code to Turn ON Microphone - This is the code used to turn the microphone input on so

that the user can listen for any foreign sounds at the secured premises.

PROGRAMMING THE “ARM” MESSAGE

When programming messages into the Voice board, you must always program the area Arm message first followed

immediately by the Disarm message for the same area. When programming the area Arm message the panel will

always assume that the Disarm message will be the next message (eg if the Area A arm message is message

number 1, the panel will assume that the Area A disarm message will be message number 2).

P1001E XX Area “A” Arm message number - This is the customised message number to play when Area

“A” is armed remotely by Command Control.

P1002E XX Area “B” Arm message number - This is the customised message number to play when Area

“B” is armed remotely by Command Control.

P1003E XX Area “C” Arm message number - This is the customised message number to play when Area

“C” is armed remotely by Command Control.

P1004E XX Area “D” Arm message number - This is the customised message number to play when Area

“D” is armed remotely by Command Control.

PROGRAMMING THE “ON” MESSAGE FOR “OUTPUTS”

When programming messages into the Voice board, you must always program the output On message first followed

immediately by the output Off message for the same output. When programming the output On message the panel

will always assume that the output Off message will be the next message (eg if the output number 5 On message is

message number 16, the panel will assume that the output number 5 Off message will be message number 17).

P1031E XX Output #1 ON message number - This is the customised message number to play when Output

#1 turns ON remotely by Command Control.

P1032E XX Output #2 ON message number - This is the customised message number to play when Output

#2 turns ON remotely by Command Control.

P1033E XX Output #3 ON message number - This is the customised message number to play when Output

#3 turns ON remotely by Command Control.

P1034E XX Output #4 ON message number - This is the customised message number to play when Output

#4 turns ON remotely by Command Control.

P1035E XX Output #5 ON message number - This is the customised message number to play when Output

#5 turns ON remotely by Command Control.

P1036E XX Output #6 ON message number - This is the customised message number to play when Output

1 2 ... 58 59 60 61 62 63 64 65 66 67 68 ... 102 103

Komentarze do niniejszej Instrukcji

Brak uwag

AAP Elite S series Dokumentacja Strona 63

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa AAP Elite S series