AAP Elite S series Dokumentacja Pobierz pdf (Strona 55)

Page 55

Scenario Options;

1 = Call Telephone Number 1 6 = Call Telephone Number 6

2 = Call Telephone Number 2 7 = Return to step 1 until the event is kissed-off

3 = Call Telephone Number 3 9 = Stop if kissed-off, if not proceed to next step

4 = Call Telephone Number 4

5 = Call Telephone Number 5

Example 1 (alternate dialling) 1 9 2 9 7

In this example we have defined a scenario with five steps as follows.

Step 1 - Dial Ph # 1.

Step 2 - If not Kissed-off (defined by the 9) continue to next step

Step 3 - Dial Ph # 2

Step 4 - If not Kissed-off (defined by the 9) continue to next step

Step 5 - If not kissed-off return to Ph #1 (the 7 causes a return to the start)

This process is repeated until kissed-off or the maximum number of dialling attempts have been reached for this

scenario.

Example 2 (dual reporting) 1 7 2 7

In this example we have defined a scenario with four steps as follows.

Step 1 - Dial Ph # 1.

Step 2 - If not Kissed-off return to Ph # 1 (the 7 causes a return to the start).

When kissed-off or the maximum re-tries reached, move forward to the next step.

Step 3 - Dial Ph # 2

Step 4 - If not kissed-off return to Ph # 2 (the 7 means return to the start of the

entries after the last 7).

When kissed-off or the maximum re-tries reached, move forward to the next step. If no further steps, stop.

The first step (up to the !st 7) must be completed i.e. kissed-off or the maximum re-tries reached, before the panel

can move past the first “7”. Then it can step forward and execute additional instructions up to the next 7. When the

format is Contact ID or 4+2 the use of the two sevens in the scenario forces the panel to report the same signal to

both numbers (Dual reporting).

MAXIMUM DIAL ATTEMPTS PER SCENARIO NUMBER P896E - P899E

The maximum dialling attempts sets a limit to the number of calls made per alarm event. If the dialler is not kissed off

and the dialling attempts limit is reached, the panel will stop dialling. The unreported alarm condition will remain in the

dialler buffer and will get reported when a new event triggers the dialler again. If a scenario is used for the Callback

feature the maximum dial attempts is ignored for that scenario and it will only dial once. If callback fails for any

reason (eg telephone number engaged), Callback must be initiated again.

P896E Maximum dialling attempts for Scenario # 1-Value 1-99 (Default=20)

P897E Maximum dialling attempts for Scenario # 2-Value 1-99 (Default=20)

P898E Maximum dialling attempts for Scenario # 3-Value 1-99 (Default=20)

P899E Maximum dialling attempts for Scenario # 4-Value 1-99 (Default=20)

TELEPHONE NUMBER PREFIX P830E

This Prefix can be added to the beginning of any of the 6 telephone numbers by turning on option 6 at addresses

P843E-P848E.

P830E Telephone Number Prefix - 16 Digits Maximum (Pauses and special characters allowed)

PROGRAM TELEPHONE NUMBERS - P831E - P836E

There are 16 digits available in each of the telephone numbers including five special characters. To program the

special characters that include dialling pauses, the * and # characters, etc, refer to the table below.

Character LCD KP Button

Displayed as

On LCD KP

# Character “Control” ”2” #

* Character “Control” ”3” *

2.5 sec pause “Control” ”4” -

Wait for 2nd Dial Tone “Control” ”5” W

5 sec pause “Control” ”6” =

1 2 ... 50 51 52 53 54 55 56 57 58 59 60 ... 102 103

Komentarze do niniejszej Instrukcji

Brak uwag

AAP Elite S series Dokumentacja Strona 55

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa AAP Elite S series